Back to marketplace

C15.4 Glass, ceramics and composites

No description yet. This curated deck is ready for daily study.

Total cards: 23•Content version: v4•Public deck•Updated: 8/1/2026

Card preview (23)

#1
Front (Question)

What is glass mainly out of?

Back (Answer)

Sand - limestone = sodium carbonate

#2
Front (Question)

What is the most common form of glass?

Back (Answer)

Called soda - lime glass

#3
Front (Question)

How is glass made?

Back (Answer)

The raw materials heated to 1500 degrees They melt and react form molten gas. As the glass turns into a solid - this particles do not form a regular pattern. It is as if the particles in the molten glass are frozen in place

#4
Front (Question)

How can different types of glass be made?

Back (Answer)

Can be made by varying the glass - making mixture or by incorporating other material into the glass

#5
Front (Question)

What is borosilicate glass used for?

Back (Answer)

Used for ovenware and test-tubes

#6
Front (Question)

What are some examples of ceramics?

Back (Answer)

Titles - bricks - bathroom sinks

#7
Front (Question)

What are the properties of ceramics?

Back (Answer)

Hard but generally brittle Electrical insulators and resistant to chemical attack Made by moulding wet clay into the desire shapes - and the heating them in a furnace to around 1000 degrees

#8
Front (Question)

What does clay contain?

Back (Answer)

Compounds of metals such as aluminium and pottasium - and non-metals such as silicon and oxygen

#9
Front (Question)

What type of bonding is present in Ceramics?

Back (Answer)

Ionic and covalent bonding

#10
Front (Question)

How are ions and atoms arranged in ceramics?

Back (Answer)

Arranged in a giant structure that form layers

#11
Front (Question)

What happens when the clay is wet?

Back (Answer)

Water molecules get between the layers of clay and make it slimy (as on a potter’s wheel)

#12
Front (Question)

What happens when the clay is fired up in a furnance?

Back (Answer)

Water is driven out and strong bonds form between the layers in the giant structure - changing the properties dramatically

#13
Front (Question)

What happens if there is a high temperature in the furnace?

Back (Answer)

The higher the temperature inside the kiln or furnace - the harder the ceramic formed

#14
Front (Question)

Why are ceramics brittle?

Back (Answer)

Because a sharp blow can distort layers in their structure so that ions with like charges are adjacent and repel each other away - cracking the ceramic object

#15
Front (Question)

What is a composite made up of?

Back (Answer)

2 materials - making a product with improved properties for a particular use. With one material acting as a binder for the other material - improving a desirable property that neither of the original materials could offer alone

#16
Front (Question)

What is reinforcement?

Back (Answer)

One material surrounding and binding together fibres or fragments of the other material

#17
Front (Question)

What are the properties of composite glass-ceramic?

Back (Answer)

Hard and very tough - No longer brittle as the glass melts between the crystals in the ceramics - so any cracks cannot spread through the whole structure

#18
Front (Question)

Why can a polymer layer be added to a materials surface?

Back (Answer)

Makes the surface waterproof - harder - stronger

#19
Front (Question)

How can the properties of concrete can be improved?

Back (Answer)

By reinforcing it with steel rods or mesh

#20
Front (Question)

What is the compressive strength?

Back (Answer)

A measure of how well a material resists being crushed when a force is applied

#21
Front (Question)

What is the tensile strength?

Back (Answer)

The tension a material can withstand without breaking

#22
Front (Question)

How can concrete be made?

Back (Answer)

From cement - stand and gravel mixed with water and left to set Concrete is a very hard composite and is very strong in compression

#23
Front (Question)

How can concrete be made more resistant?

Back (Answer)

Can be made more resistant to bending forces by setting it around a matrix of steel rods - forming reinforced steel